5V3a Battery Charge Discharge Machine Formation Pouch Cell Charger

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: TOB-512-3LP
• Test Region: Charge and Discharge
• Application: Lithium-ion Battery
• Customized: Customized
• MOQ: 1 Set
• Clamp Adjust Range: 70mm
• Sampling Inspection Cycle: ≤10s
• Time Accuracy: ≤±0.1%
• Transport Package: Standard Export Packing
• Specification: L1440*W500*H1840mm
• Trademark: TOB
• Origin: China

Product Description

5V3A 512 Channels Battery Charge Discharge Machine Pouch Cell Formation Charger

 

1. Machine describe

TOB-512-3LP is mainly composed of a communication interface and a battery detection cabinet. The battery testing cabinet is composed of battery clamp and a plate body to placing fixture, a constant current constant voltage source, a registration control circuit, a sampling circuit, a single chip microcomputer and a control panel.

 

2. Main feature

2.1 Each equipment can do constant current constant voltage charging and constant current discharge testing for 512 pcs of cell which is within the voltage range.

2.2 Constant current and constant voltage power supply, constant current to constant voltage switching without impact, especially suitable for lithium ion battery charging requirements.

2.3 This equipment adopts AVR single-chip computer as the control center, and cooperates with the peripheral sampling circuit, which can be controlled by the upper computer. When connected to the computer, the complete charge and discharge curve of all channels can be saved. Or it can be separated from the upper computer and operated by the control panel to complete constant current and constant voltage charging, constant current discharge test, etc.

2.4 Each battery has its own independent constant current and constant voltage source, and the self-forming loop does not affect each other.

2.5 A light-emitting diode is mounted on each of the battery fixtures as an operational status display, and when the discharge is completed, it can be used to indicate battery capacity sorting.

2.6 Real-time detection each battery voltage. When charging, first constant current charging, when the battery voltage reaches the set value, it will smoothly switch to constant voltage charging, and when the set time or current termination condition is satisfied, the charging ends. When constant current discharging, the battery voltage is lower than the set value, the discharge ends and the corresponding battery indicator lights up.

2.7 With power-down protection function, the original workflow can continue to run after the power back.

2.8 The upper computer can set 32 working step parameters and 256 cycles. Each upper computer can connect 1 to 15 sets of single-chip microcomputer system. (suggest below 10 sets)

2.9 Supporting software features

• Use the graphical operation interface to display data such as voltage, current, time and capacity of each battery, and display the corresponding working status and abnormal conditions in various colors.
• Arbitrary segmented battery capacity indication (up to 100 segments)
• The data points can be recorded according to the changing conditions of voltage, current and time to form a complete charging and discharging curve data, and the time interval of the curve data points is ≤10 seconds.
• Battery sorting function under various conditions (capacity, time, open circuit voltage, discharge platform, etc.)
• Automatic calculation of constant current charging ratio, capacity loss, discharge efficiency, average voltage, median voltage, etc.
• Operator permission setting, hierarchical operation
• Can display charge and discharge curve, cycle diagram

 

Model	TOB-512-3LP
Channel No.	512
Workflow control method	Whole equipment control
Charging mode	Constant voltage, constant current
Charge cutoff condition	Voltage, current, time, capacity
Discharge mode	Constant current
Discharge cutoff condition	Voltage, time, capacity
Sampling inspection cycle	≤10s
Voltage measurement range	0~5V, Resolution 1mV
Battery voltage range	Charge: 0~4.5V  Discharge: 4.5~2.0V
Constant voltage range	3~4.5V
Voltage accuracy	± (0.05%RD+0.1%FS)
Current range	Charge: 0.015-3A  Discharge: 0.015-3A, Resolution 1mA
Current accuracy	± (0.1%RD+0.1%FS)
Time set range	Any setting within 0~30000 minutes, the time unit is min
Time accuracy	≤±0.1%
Clamp type	Polymer clamp
Clamp adjust range	70mm
Support battery type	Pouch cell
Working power	Three-phase four-wire system, AC380V±5%, 50HZ, 14.5KW
Communication method	RS485, Baud rate 57600
Dimension	L1440 × W500 × H1840mm
Working environment	0-40ºC
Full load operating current	Phase line up to 15A, zero line up to 3A
Startup current	Air switch closing moment about 60A
Net weight	About 350kg
System main configuration requirements	Minimum configuration of computer system: CPU above P4, memory above 2G, hard disk space above 200G, EGA/VGA color display, one CD-ROM, one mouse, MicrosoftTM Windows XP and above, one available RS232 serial communication port, Windows support Printer. The computer system is self-contained by the user, and the number of microcomputer systems is determined according to actual needs.