| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year, 1 Year |
|
Still deciding? Get samples of US$ 16500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SPECIFICATIONS
Overview:
The TOB-5000MLH high-speed centrifugal spray dryer is a special drying equipment suitable for drying emulsions, suspensions, pastes, solutions and other liquids. In polymers and resins: dyes, pigments, ceramics, glass, rust removers, insecticides: carbohydrates, dairy products: detergents and surface active products: fertilizers: drying of organic compounds and inorganic compounds The performance is particularly outstanding.
Equipment principle:
After the air passes through the filter and the heating device, it enters the hot air distributor on the top of the drying chamber. The hot air passing through the air distributor enters the drying chamber in a spiral shape and uniformly. At the same time, the pump sends the liquid to the centrifugal mounted on the top of the drying chamber. With the spray head, the material liquid is sprayed into very small mist droplets, which greatly increases the specific surface area of the material liquid and the hot air. Small droplets and hot air flow and sink together, and the water evaporates quickly and is dried into granular products in a very short time, which are collected in a cyclone separator, and the exhaust gas is discharged to the outside world.
Chemical industry:
Catalysts, sulfuric acid, amino acids, white carbon black, sodium fluoride, dyes and pigments, dye intermediates, compound fertilizers, formaldehyde silicic acid, etc.
Plastic resin:
AB, ABS emulsion, liquid, urea-formaldehyde resin, phenolic resin, dense rubber (urea) formaldehyde resin, polyethylene, polyvinyl chloride, olefin, etc.
Food industry:
Fat-rich milk powder, gramin, cocoa milk powder, milk substitute powder, egg white (yellow), white blood cells.
Food and extract:
Oatmeal, chicken juice, coffee, instant tea, flavoring, meat, white matter, soybean, peanut protein, hydrolysate, etc.
Sugars:
Corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate, etc.
Ceramic slurry:
Alumina, ceramic tile materials, magnesia, talc, ceramic powder, etc.
Equipment characteristics
(1) Original centrifugal nozzle, high efficiency (two-fluid nozzle can be used, or it can be customized into a centrifugal and two-fluid combo)
(2) The feed volume can be adjusted by the feed peristaltic pump, and the small sample volume can reach 50ml. To
(3) The finished dry powder after drying has a relatively uniform particle size, and more than 95% of the dry powder is in the same particle size range.
(4) The drying speed is fast, 95-98% of the water can be evaporated in an instant, and it takes more than ten seconds to complete the drying.
(5) Using parallel-flow spray drying, the temperature of the droplets is not high during the drying process, and the product quality is good.
(6) According to the physical properties of the material, it can be dried with hot air or cold air.
(7) Because the drying process is completed in an instant, the particles of the product can basically maintain the approximate spherical shape of the droplets, and the product has good dispersibility, fluidity and solubility.
(8) Simplified production process and convenient operation and control. Spray drying is usually used for solvents with a moisture content of 40-60%. (9) Even if the moisture content is as high as 90%, special materials can be dried into powder products at one time.
(10) In order to prevent the material from being polluted and prolong the life of the equipment, all parts in contact with the material are made of 1Cr18Ni9Ti stainless steel.
(11) The whole body is made of mirror stainless steel to prevent wall deformation and corrosion.
(12) It is equipped with a sample observation window, which is safe and intuitive.
parameters
|
Model |
TOB-5000MLH |
TOB-10000MLH |
TOB-15000MLH |
TOB-25000MLH |
TOB-50000MLH |
|
Inlet temp(ºC) |
140-350 automatic control |
||||
|
Output temp(ºC) |
80~90 |
||||
|
Upper limit of water evaporation(kg/h) |
5 |
10 |
15 |
25 |
50 |
|
Transmission form of centrifugal spray head |
Compressed air transmission |
Mechanical transmission |
|||
|
Rotating speed(rpm) |
25000 |
18000 |
|||
|
Diameter of spray disc |
50 |
120 |
|||
|
Heat source |
Electricity |
Steam + electricity |
|||
|
Electric heating upper limit power(KW) |
9 |
25 |
30 |
36 |
72 |
|
Dimensions(m) |
1.8*0.93*2.2 |
2.2*1.6*2.2 |
2.6*1.2*2.5 |
3*2.7*4.26 |
3.5*3.5*.4.8 |
|
Dry powder recovery rate(%) |
≥95 |
||||
Note: The parameter configuration can be designed according to the reasonable requirements of customers.
The model in the above table is a standard type, and the data in the table will change accordingly for the other specifications according to the corresponding requirements. There are also larger capacity machines, if necessary, you can consult the sales.
){kind=link}