Battery Constant Temperature Test Chamber

• After-sales Service: 1 Year
• Warranty: 1 Year
• Type: Finished Batteries Tester
• Test Region: Temperature
• Application: Lithium-ion Battery
• Customized: Customized
• Model NO.: TOB-HW-200-160CH
• MOQ: 1 Set
• Transport Package: Standard Export Packing
• Trademark: TOB
• Origin: China

Product Description

Button/Polymer Battery Constant Temperature Test Chamber

 

1. Product application	Constant temperature test for polymer battery and button battery
	Manufacturers of electronics, electrical engineering, instrumentation, materials, semiconductors, etc. conduct constant temperature tests on non-flammable and non-explosive items.
	Environmental protection, agricultural and livestock, aquatic scientific research institutions and production companies, etc., conduct constant temperature tests on water analysis, bacteria, mold, microbial cultivation, preservation, plant cultivation, and breeding experiments.
2. Sample limit	This test equipment prohibits:
	Test or storage of flammable, explosive and volatile substances
	Test or storage of corrosive material samples
	Test or storage of strong electromagnetic emission source samples
	Testing and storage of radioactive material samples
	Test and storage of highly toxic substances
	Test or storage of samples that may produce the above-mentioned substances or objects during testing or storage
3. Capacity, Dimensions, Weight
3.1 Inner capacity	200L
3.2 Inner dimensions	W500*D500*H800 mm
3.3 Overall dimensions	W700*D1200*H1500 mm
3.4 Net weight	About 220kg
4. Performance
4.1Testing environment	The ambient temperature is + 25ºC, the relative humidity is ≤ 85%, and there is no sample in the test chamber (no load)
4.2 Temperature range	0~60ºC
4.3 Temperature fluctuation	≤1ºC (no load and stable temperature)
4.4 Temperature deviation	±2.0ºC (no load and stable temperature)
4.5 Heating time	25ºC→60ºC ≤30 min
4.6 Cooling time	25ºC→0ºC ≤50 min
5. Structure
5.1 Insulation structure	Outer wall material: high-quality cold rolled steel plate, surface spray and paint treatment
	Inner wall material: stainless steel plate SUS304
	Box insulation material: polyurethane foam (insulation thickness 50mm)
5.2 Air conditioning channel	Axial fan, heater, evaporator
5.3 Standard configuration	Door: Hollow anti-fog tempered glass + stainless steel frame
	Lead hole (with soft rubber plug): φ50mm, 4pcs (located on the back side of the box)
	Casters: 4 (with brake)
	Sample rack: 4 layers of electrical insulation sample rack, load bearing (uniform distribution): 10kg/layer
	Lighting: LED lighting
5.4 Control panel	Touch control buttons
5.5 Heater	Heater control mode: contactless, equal period pulse-width modulation, SSR (solid state relay)
6. Refrigeration system
6.1 Refrigeration compressor	Fully enclosed piston compressor
6.2 Cooling method	Air-cooled
6.3 Throttle device	Capillary tube
6.4 Refrigerant	R134a
6.5 Welding process	Nitrogen-filled protective welding
7. Electrical control system
7.1 Controller	LED digital display + touch key controller
7.2 Setting mode	Touch key
7.3 Control mode	Forced circulation ventilation. According to the set temperature value, the control system controls the output of the heater through PID automatic calculation, so as to achieve dynamic balance.
7.4 Communication mode	Ethernet standard interface
7.5 Temperature control module	Independent research and development (after high and low temperature impact, vibration and EMC and other related tests)

 

8. Safety protection
Test chamber	Leakage protection, short circuit protection and abnormal operation of circulating fan, etc.
9. Other configuration
9.1 Power cable	(single phase + protective earth wire) 1 cable
9.2 Main power leakage circuit breaker	Single phase + protective earth wire
10. Transport (the test chamber is integral, transported as a whole)
Dimentions	Maximum size (without packaging): W700 mm×D1200 mm×H1500 mm
11. Conditions of use
11.1 Installation site	The ground is flat, with flatness ≤ 5mm / 2m
	Good ventilation
	There is no strong vibration around the equipment
	There is no strong electromagnetic field around the equipment
	There are no flammable, explosive, corrosive substances and dust around the equipment
	Proper space for use and maintenance shall be reserved around the equipment, and the opening and closing space of the box door shall be reserved at the opening door of the equipment, and there shall be no other objects in front of the box door of the equipment.
11.2 Environment condition	Temperature: 5ºC~ 35ºC, Relative humidity: ≤85%, Air pressure: 86kpa ~ 106kpa
11.3 Power supply	AC(220±22)V, (50±0.5)Hz, single phase + protective earth wire
	The grounding resistance of the earth wire is less than 4Ω
	The user is required to configure the corresponding air or power switch for the equipment at the installation site, and the switch must be used independently for the equipment.
	Power: 6kW
	Max current: 30A
11.4 Others	Opening the door during the test will cause the temperature fluctuation in the chamber.
12. Battery specifications and placement
12.1 Battery specifications	Button battery or polymer battery
12.2 Battery placement	Four layers (up to 40 button batteries can be placed on each layer)