Tob Temperature Cycling Test Chamber in Lithium-Ion Battery Research and Manufacturing

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: TOB-KS5-150C
• Effective Volume: 150L
• Temp. Range: -40ºC~+150ºC
• Temp. Fluctuation: ±0.5ºC
• Power: 380V, 50Hz,Three Phase, 9kw
• Weight: 600kg
• Transport Package: Wooden Boxes
• Specification: W750mm*H1780mm*D1500mm
• Trademark: TOB
• Origin: Fujian, China
• Production Capacity: 10000 Set/Month

Product Description

Product Description

TOB Temperature Cycling Test Chamber in Lithium-ion Battery Research and Manufacturing

A temperature cycling test chamber is a device used to simulate different temperature environments. It can perform cyclic changes within a set temperature range to test the performance and reliability of materials, components or products under extreme temperature conditions.

 

Role in Lithium-ion Battery Research and Manufacturing

The temperature cycle test chamber is crucial in the research and development and manufacturing of lithium-ion batteries, mainly reflected in the following aspects:

 

Performance evaluation:

Temperature adaptability: Test the charging and discharging performance of the battery at different temperatures to ensure its stability in extreme environments.

 

Cycle life: Evaluate the long-term cycle life of the battery by simulating temperature changes.

 

Safety testing:

Thermal stability: Detect the risk of thermal runaway of the battery at high temperatures to ensure safety.

Low temperature performance: Verify the working ability of the battery in a low temperature environment to prevent performance degradation or failure.

 

Quality control:

Consistency test: Ensure that the performance of mass-produced batteries is consistent under temperature changes.

Failure analysis: Identify potential design or manufacturing defects through temperature cycle testing.

 

R&D support:

Material research: Evaluate the performance of new materials at different temperatures and optimize battery design.

Process optimization: Improve the production process and improve battery performance through test results.

1.Product Name
1.1 Name 1.2 Model	Temperature Cycling Test Chamber TOB-KS5-150C
2. Application & Limitation
2.1 Application	Mainly used for Single cell and electronic products,components high low temperature test,temperature change etc. Environment simulate reliability test.
3. Volume & Dimension
3.1 Effective Volume	150L
3.2 Inner Dimension	W500 mm*H600 mm*D500 mm
3.3 Overall Dimension	W750mm*H1780mm*D1500mm Kindly remark:exact overall dimension pls refer to the final design drawing !
4. Performance
4.1 Condition	Air cooling type under environment temp.+5℃-+35℃,relative humidity≤85%.No load(without specimen in the testing zone)
4.2 Temp. Range	-40℃~+150℃
4.3 Temp. Fluctuation	±0.5℃
4.4 Temp. Deviation	≤±2℃
4.5 Temp. Gradient	≤±2.0℃
4.6 Temp. Heating Time	From -40℃to 85℃,full range non-linear average about5℃/mins,no load
4.7 Temp. Cooling Time	From 85℃to -40℃,full range non-linear average about5℃/mins,no load
4.8 Temp. Overshoot	≤±2℃
4.9 Noise	≤70dB(A Level)
4.10 Weight	Approx 600KG
4.11 Power	380V, 50Hz,Three phase, 9KW
4.12 Standard Compliance	IEC62133-2012-Chapter 7.2.4 Temperature cycling UL1642-Chapter 18 Temperature cycling test UN38.3 Test T.2:Thermal test IEC60068-2-1:2007 Environmental testing - Part 2: Test methods - Tests A: Cold IEC60068-2-2:2007 Environmental  testing  for  electric  and electronic products Test methods - Tests B:Dry Heat

Product Display

Company Profile