| Customization: | Available |
|---|---|
| After-sales Service: | 1year |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Functions and principles
This battery separator coating machine is used for precision coating of lithium-ion battery separators. It mainly consists of an unwinding part, a machine head part, an oven part, a traction and winding part and an electronic control part. Apply the stirred slurry evenly on the substrate to ensure that the size and weight are within the process range. After drying, it is rolled up to make preliminary preparations for the subsequent processes.
Process flow
Substrate unwinding →Tension stabilization→Micro-gravure coating→Drying→Tension stabilization→Correction→Rewinding
Substrate parameters
|
Item |
Battery Separator |
|
Substrate |
PE, PP |
|
Width (mm) |
100~320 |
|
Thickness(µm) |
8~30 |
Slurry parameters
|
Item |
Ceramic slurry |
|
Material |
Al2O3 |
|
Solvent |
Deionized water |
|
Solid content(wt%) |
3~15 |
|
Slurry specific gravity(g/cm3) |
0.6~2.0 |
|
Viscosity(mPa.s) |
500-2000 |
Coating parameters
|
Item |
Battery Separator |
|
Coating method |
Continuous coating |
|
Coating width (mm) |
Max:300 |
|
Single side coating thickness(µm) |
1~10 |
|
Single side coating weight (g/m2) |
10~25 |
|
Coating speed (m/min) |
0.5~3 |
Equipment specifications
|
Item |
Content |
|
Roller width |
400mm |
|
Mechanical speed (no load) |
Max:5m/min |
|
Unwinding specifications |
Roll diameter: Max.φ200mm. Load bearing: Max.100kg. Reel specifications: Inner diameter 3 inches, approximately 76.2mm, length≤450mm. Reel material: metal, ABS plastic, paper tube. |
|
Winding specifications |
Roll diameter: Max.φ200mm. Load bearing: Max.100kg. Reel specifications: Inner diameter 3 inches, approximately 76.2mm, length≤450mm. Reel material: metal, ABS plastic, paper tube. |
|
Oven heating method |
Electric heating |
|
Oven structure |
1 sections × 1.2m/section = 1.2m, single layer |
|
Oven temperature |
Max:140ºC |
Environmental requirements
|
Item |
Content |
|
Dimensions |
The equipment is about L (2.9m) × W (1.7m) × H (1.9m) (width includes electrical cabinet, length does not include operating space) |
|
Power requirements |
Three-phase AC380V±10%, 50Hz, earth wire. Equipment power: 20KW, number of main power supplies: 1. |
|
Compressed air |
Compressed air pressure:≥0.6MPa, pressure fluctuation±1% (clean air after water removal, oil-free, filtering and pressure stabilization). Compressed air consumption: 3m³/h, number of interfaces: 1/unit. Interface trachea specification: Φ10mm. |
|
Environmental |
Ambient temperature: 25±5ºCfor the coating part (according to the buyer's process requirements). Relative humidity: 10%~30%RCH (according to the buyer's process requirements). Cleanliness: Class 100,000 (according to the buyer's process requirements). |
|
Ground requirements |
Total weight of coating machine: about 1.3 tons; Cement floor or terrazzo floor, flatness±5mm/m2, load-bearing capacity≥500kg/m2. |
|
Oven air volume |
Maximum exhaust air volume, at 140ºC: positive pole 1800m2/h, negative pole 900m2/h. Maximum fresh air volume, at 60°C: positive pole 1500m2/h, negative pole 900m2/h. |
){kind=link}