Temperature Cycle Alternating Environmental Test Chamber

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: TOB-KS5-150C
• Test Region: Temperature
• Application: Lithium-ion Battery
• Customized: Customized
• Effective Volume: 150L
• Inner Dimension: W500 mm*H600 mm*D500 mm
• Temp. Range: -40ºC~+150ºC
• Noise: ≤70dB(a Level)
• Transport Package: Wooden Boxes
• Specification: 600kg
• Trademark: TOB
• Origin: China
• Production Capacity: 10000sets/Month

Product Description

Temperature Cycle Alternating Environmental Test Chamber

1. Product Name
1.1 Name 1.2 Model	Temperature Cycling Test Chamber TOB-KS5-150C
2. Application & Limitation
2.1 Application	Mainly used for Single cell and electronic products,components high low temperature test,temperature change etc. Environment simulate reliability test.
3. Volume & Dimension
3.1 Effective Volume	150L
3.2 Inner Dimension	W500 mm*H600 mm*D500 mm
3.3 Overall Dimension	W750mm*H1780mm*D1500mm Kindly remark:exact overall dimension pls refer to the final design drawing !
4. Performance
4.1 Condition	Air cooling type under environment temp.+5ºC~+35ºC,relative humidity≤85%.No load(without specimen in the testing zone)
4.2 Temp. Range	-40ºC~+150ºC
4.3 Temp. Fluctuation	±0.5ºC
4.4 Temp. Deviation	≤±2ºC
4.5 Temp. Gradient	≤±2.0ºC
4.6 Temp. Heating Time	From -40ºC to 85ºC,full range non-linear average about5ºC/mins,no load
4.7 Temp. Cooling Time	From 85ºCto -40ºC ,full range non-linear average about5ºC/mins,no load
4.8 Temp. Overshoot	≤±2ºC
4.9 Noise	≤70dB(A Level)
4.10 Weight	Approx 600KG
4.11 Power	380V, 50Hz,Three phase, 9KW
4.12 Standard Compliance	IEC62133-2012-Chapter 7.2.4 Temperature cycling UL1642-Chapter 18 Temperature cycling test UN38.3 Test T.2:Thermal test IEC60068-2-1:2007 Environmental testing - Part 2: Test methods - Tests A: Cold IEC60068-2-2:2007 Environmental testing for electric and electronic products Test methods - Tests B:Dry Heat
5. Structure & Material
5.1 External Chamber	Cold-roll steel with painting.
5.2Internal Chamber	1.0mm SUS#304 stainless steel. Bottom: 2mm thick #304 stainless steel,
5.3 Insulation Material	100mm PU Polyurethane foam insulation material
5.4 Chamber Door	Single open door
5.5 Observation Window	Vacuum glass observation window (Size refer design drawing)
5.6 Testing Hole	2 pcs of ¢400mm testing hole on side of the chamber, with silicon seal and stainless steel cover.
5.7 Sealing	Adopt original imported silicon rubber strip, with high sealing performance.
5.8 Sample Holder	Sample holder with insulation material,2 layers, capacity less than30kg/layer.
5.9 Lighting inside chamber	1 set of energy saving light inside the observation window
5.10 Tri-color light alarm system	1 set of tri-color light alarm to indicated the running status
5.11 Safety Functions	1 piece smoke exhaust vent. 2 pieces of Explosion proof chain on the chamber's side. 1 set of explosion-proof pressure relief door.
6. Air Supply System
6.1Air supply	Force internal from upper to lower air supply circulation.
6.2 Cyclic Motor	Taiwan brand low pressure asynchronous motor
6.3 Blower	Multi-blades centrifugal circulating blower, high low temp. resistant aluminum blades
6.4 Sensor	PT100 temperature sensor(Wet-dry bulb)
7. Refrigeration System
Air cooling method	Air cooling type compressor
7.1 Compressor	Germany GEA Boke or similar level compressor
7.2 Refrigerant	R448a
7.3 Condenser	Air cooling high efficiency forced convection finned type
7.4 Evaporator	High efficiency multi-segment fin type evaporator
7.5 Others	Oil Separator,etc...
8. Heating System
8.1Heating Tube	Naked wire type nickel chromium alloy electric heating tube
9. Controller & Control Circuit- controller
9.1Controller	controller RS-485 or Lan port only can be choose one of them.
10.1 Protection Function
	1.With specimen anti-condensing, over-temperature protection (also with independent adjustable temperature protector) 2. 2. No fuse protection switch 3. Heater over-temp. Protection switch 4.Compressor over-load, over heating 5. Compressor high low pressure protection 6. System over current protection device
11. Other Accessories
11.1 Standard Configuration	1.2 layers insulation sample shelf ,loading capacity (average)30KG/Layer. 2.2 Corks for diameter 50mm testing hole. 3.Operation & Maintenance manual and monitoring software
12. Operating Condition
	1. Environment Temp. : 5ºC-35ºC; 2.Relative Humidity: ≤85%RH; 3.Atmospheric Pressure:80kPa~106kPa 4. Away from strong vibration source 5.Power source: 5.1.380V AC(±10%),50Hz 3 Phase 4 wires +grounding wire, earthing resistance≤4Ω;