Battery Inverter DC Welding Equipment

• Customization: Available
• Control: Semi-Automatic
• Cooling Way: Air Cooling
• Model NO.: TOB-IP-3000A
• Electrode Stroke: Vertical
• Transmission: Pneumatic
• Conductive Way: One-Sided
• Welding Spot Number: Single
• Type: Universal
• Weight: 19kg
• Welding Thickness: 0.3mm Steel Nickel Strip, 0.2mm Pure Nickel
• Maximum Usage Rate: 20%(3000A)
• Maximum Output Current: 3000A
• Transport Package: Wooden Boxes
• Specification: 195(W)*280(H)*450(D)mm
• Trademark: TOB
• Origin: China

Product Description

Battery Inverter DC Welding Equipment

Technical specifications

1.This device is an integrated inverter secondary rectification DC welding power supply.
The device has the welding current continuous setting and the switching function for the pre-stored 8 sets of welding parameters, and has the welding detection function, which can control the welding quality and ensure the welding quality. This device is an inverter welding equipment developed for the industry of high quality welding requirements.
The device has the function of slow current rise and slow down, and has two-stage electric output function, which can be adapted to the welding of various welding materials and various welding process requirements.

2. Characteristics of the equipment
1. Load (LOAD) current constant current control, which is conducive to high quality welding control
2.4KHz high-frequency modulation inverter control is conducive to high-speed response to high-quality welding control.
3. The 2-stage energization function is used to overcome the plating problem of the welding workpiece and to adapt to various process requirements.
4. The function of slow rise and slow down is beneficial to suppress the splash phenomenon in welding. The switching of 8 welding specifications is beneficial to the rapid change of welding parameters according to different welding requirements in welding.
A variety of welding information and welding parameters are displayed in the
5.20*4 line liquid crystal display to facilitate the confirmation of the welding results.

6.It is possible to compare the parameters of the welding with the parameters of the equipment and determine whether the output is normal (GO) or abnormal (GN) display and signal.

model	TOB-IP-3000A (inverter DC welding control device)
Power supply	AC 220V±10% 50/60Hz
condition	Operating temperature 0°C~+50°C Humidity: 90% or less
Maximum output current	3000A
Control frequency	4KHz
Control way	Static current control method for primary current detection
cooling method	Forced air cooling
Maximum usage rate:	20%(3000A)
Welding transformer output	Maximum current 3000A no-load voltage 8.5V
Welding condition (MODE) setting	8MODE(MODE 0,1,2,3,4,5,6,7)
Welding current detection function	Freely set the range of ±3~±9%±N of the set current and monitor it. "GO" is output when the actual welding current is within the set current, and "NG" is output when the set current is exceeded.
Welding current setting range	1)CURRENT  1      :   800~5000A 2)CURRENT  2      :   800~5000A
Judgment result output method(I/0 CONNECTORS)	OPEN COLLECTOR output (DC 30V 200mA MAX)
Dimensions	195(W)*280(H)*450(D)mm
weight	19kg
Welding thickness	0.3mm steel nickel strip, 0.2mm pure nickel