| Model |
TOB-XFZH02 |
| Lower Barrel Parts |
| Design total volume |
3.8L |
| Effective volume |
1.2L-2L |
| Container inner diameter |
180mm |
| Container inside depth |
150mm |
| Container material |
The contact part with material is 304 stainless steel |
| Tempering jacket form |
Single-layer jacket, for cooling or heating |
| Tempering jacket port |
G3/8", with quick-open type union, jacket pressure resistance ≤0.4MPa |
| Tempering jacket circulation system |
Prepared by customer
Suggest the temperature of jacket inlet ≤ 8 ºC, and the cooling water flow > 1.5 L/min |
| Material-discharge |
No discharge port at the bottom of the barrel |
| Environment temperature |
-10 ~ 120°C |
| Move mode |
No |
| Mixing Parts |
| Working frequency |
5-50 hz |
| Mixing power |
0.75 kw |
| Mixing blade speed |
8-76 rpm |
| Planetary box speed |
5-52 rpm |
| Mixing blade diameter |
94 mm |
| Mixing blade type |
Variable cross-section spiral type, 90 ° helix |
| Mixing blade material |
304 stainless steel |
| Mixing blade line-speed |
0.03-0.37 m/s |
| Mixing blade number |
2 pcs |
| Distance between mixing blades |
6±1 mm |
| Distance between balde and barrel wall |
3+1 mm |
| Distance between blade and barrel bottom |
2-3 mm |
| Dispersing Parts |
| Working frequency |
5-50 hz |
| Dispersing power |
1.1 kw |
| Dispersing speed |
450-4450 rpm |
| Dispersing plate diameter |
60 mm |
| Dispersing plate type |
Serrated |
| Dispersing plate material |
304 stainless steel |
| Dispersing line-speed |
1.3-13 m/s |
| Dispersing number |
1 pcs |
| Dispersing shaft number |
1 pcs |
| Wall-scraping parts |
- Scraping bracket material: 304 stainless steel
- Scraper board material: PTFE
- Wall scraping speed: consistent with the speed of the planetary box
- Removable: Removable design (removal of the scraping wall during high-viscosity process)
|
| Base and Lifting Parts |
- Parts material: High rigid structure carbon steel
- Lifting method: hydraulic lifting
- Lifting guide: guide rod
- Lifting stroke: ≤225mm
|
| Upper Barrel Parts |
- Upper barrel material: 304 stainless steel
- Powder and liquid feeding port: DN40, and hopper 1pcs
- Mirror port: DN40 tempered glass mirror 1pcs
- Spotlight: DN40 tempered glass mirror 1pcs
- Vacuuming port: G1/2" coupling 1pcs
- Exhaust port: shared with the vacuum port
- Digital vacuum gauge port: M14×1.5
|
| Control System |
- Electrical cabinet: used to house low-voltage electrical components such as inverters
- Operation panel: used to place buttons, knobs, etc.
- Power supply: AC 3×380V±5%, 50Hz
- Control method: electric control
- Power control and speed regulation mode: inverter start and control
- Cooling method: air cooling
- Operation mode: panel operation, button and knob
- Digital temperature display: material temperature
- Emergency stop button: 1 pcs
- Alarm system: over temperature alarm, over temperature alarm shutdown, alarm shutdown
- Speed display: the panel displays the speed
- Power indicator: 1 pcs
|
| Safety System |
- Emergency stop: press the emergency stop switch, the equipment will stop immediately, and no operation can be performed
- Start low-speed mixing: mixing while lifting the barrel
- High speed dispersion: start mixing after the barrel is up to the position
- Safety lock during operation: when the machine is running, the mixing tank cannot be lowered and opened.
- Prevent the backflow of vacuum pipeline: the special design of vacuum buffer tank can effectively prevent the phenomenon of vacuum pump oil backflow to the mixing tank
- Operation failure stop: the inverter has its own overload, overcurrent, overvoltage, leakage, lack of equal protection
- The mixing barrel rises and falls: the mixing barrel can only rise after it is in place
- The vacuum in the mixing tank cannot be lowered without exhausting the vacuum (not returning to normal pressure)
- The mixing tank can only be started after the high-speed dispersion is in place.
- After the mixing tank rises to the position, it is equipped with a locking protection system to prevent the mixing tank from falling abnormally during operation.
- Dry mixing stage, while the barrel rising, the mixing blade need to mix at the same time.
|
Other description |
- Temperature measuring probe: Pt100
- Temperature measurement method: the temperature probe is installed on the wall of the barrel to detect the temperature of the material
- Bearings for transmission components: high-speed components are imported bearings, and low-speed components are domestic bearings
- Oil seal: domestic brand, O-ring for static seal, mechanical seal for dynamic seal
- Lubricating grease: domestic brand
- Mechanical seal lubricant: imported brand
- Valves: domestic brands
- Vacuum design requirements: optional, or customer prepare a vacuum pump, pumping capacity 2L/S (2XZ-2)
- Vacuum maintenance: -0.098Mpa, keep the pressure for 24 hours > -0.085Mpa, no leakage into the barrel
- Total power: >3kw
- Total weight: about 550kg
- Dimensions: L1000mm×W700mm×H1835mm
- Appearance color: beige
- Floor load: 900kg/m2
|
Audited Supplier 
){kind=link}